MCA2000 (Digital display)
2chAir Pressure Independent Controlled Dispenser
MCA2000 type
One unit has the functions of two units.
Each port can be set to any pressure setting value, timer setting value, or mode, and all external input/output signals are independently controlled for two units and can also be used for work with different coating ratios.
The pressure display will be digital display.
Specifications
| Type | MCA 1000 |
|---|---|
| Power | DC 12V 1A |
| Power consumption | 6W or less |
| Supplying air pressure | ～max 0.8 Mpa |
| Air pressure | 0.05 ～0.7 Mpa (Remark *1) |
| Proof pressure | 0.8 Mpa |
| Fluid used | Air/ Inert gas |
| Operating Temperature range | 5 – 45℃ |
| Vacuum Pressure | ～ー48KPa |
| Display（Pressure） | Digital display |
| Port | 2CH (Independent Control) |
| Setting Mode | Timer mode / Free mode |
| Timer | 0.01 – 999 seconds (Three digits) |
| Applicable viscosity range | 400Pas (400,000cps) (Remark*2) |
| Additional function | Vaccuming |
| Dimensions (outside) | W180 x D168 x H95 mm |
| Weight | 1.7kg |
| Input signal | Start up : Connecting input without voltage (front pin jack) |
| Input signal | Completing signal : Photocoupler (max. 80v 50mA) |
| Output signal | Completing signal : Photocoupler (max. 80v 50mA) |
Remark*1 -When using syringe barrel (the genuine parts), air pressure should be 0.5Mpa or less.
Remark*2 – Applicable viscosity should be changed depending on liquid characters and using conditions.
Note: When installing, please look for a good place like no source of noise and etc.