MCA200 (Digital display)
Air Pressure Control Dispenser
MCA 200 type
Like the MCA100 model, this is assembled with high quality of Japanese genuine pneumatic equipment and high quality and lower price and improve safety of working environment.
Digital pressure display allows uniform management of coating work and maintains high reproducibility.
Specifications
Type | MCA 200 |
---|---|
Power | DC 12V 1A |
Power consumption | 3W or less |
Supplying air pressure | ~ Max. 0.8 Mpa |
Using Air pressure | 0.05 ~0.7 Mpa (Remark *1) |
Proof pressure | 0.8 Mpa |
Fluid used | Air/ Inert gas |
Operating Temperature range | 5 – 45℃ |
Vaccum Pressure | ~ー48KPa |
Display(Pressure) | Digital display |
Port | 1CH |
Setting Mode | Timer mode / Free mode |
Timer | 0.001 – 999.99 seconds (Four digits) (Remark *2) |
Applicable viscosity range | 400Pas (400,000cps) (Remark*3) |
Additional function | Vaccuming |
Dimensions (outside) | W138 (140.8) x D138 (185.7) x H88 (92.6) mm |
Weight | 1.05 kg |
Input signal | Start up : Connecting input without voltage (front pin jack) |
Input signal | Start up : With voltage (DC12 – 24V : connector on backside) |
Output signal | Completing signal : Photocoupler (max. 80v 50mA) |
Remark*1 -When using syringe barrel (the genuine parts), air pressure should be 0.5Mpa or less.
Remark*2 – Min. start time should be 0.003 seconds
Remark*3 – Range of applicable viscosity can be changed by liquid type