1. HOME
  2. Our Products
  3. Dispenser
  4. MCA100 (Analog display)

Dispenser

MCA100 (Analog display)

Air Pressure Control Dispenser
MCA 100 type

This machine is assembled with high quality of Japanese genuine pneumatic equipment and high quality and lower price.
By filling the liquid into a syringe barrel with excellent chemical resistant to harsh chemicals, it can safely dispense fixed amount of liquid over a wide range of areas.
The pressure display is an analog meter type.

Specifications

Type MCA100
Power DC 12V 1A
Power consumption 3W or less
Supplying air pressure ~ Max. 0.8 Mpa
Using Air pressure 0.05 ~0.7 Mpa (Remark *1)
Proof pressure 0.8 Mpa
Fluid used Air/ Inert gas
Operating Temperature range 5 – 45℃
Vaccum Pressure ~ー48KPa
Display(Pressure) Analog display
Port 1CH
Setting Mode Timer mode / Free mode
Timer 0.001 – 999.99 seconds (Four digits) (Remark *2)
Applicable viscosity range 400Pas (400,000cps) (Remark*3)
Additional function Vaccuming
Dimensions (outside) W138 (140.8) x D138 (185.7) x H88 (92.6) mm
Weight 1.05 kg
Input signal Start up : Connecting input without voltage (front pin jack)
Input signal Start up : With voltage (DC12 – 24V : connector on backside)
Output signal Completing signal : Photocoupler (max. 80v 50mA)

Remark*1 -When using syringe barrel (the genuine parts), air pressure should be 0.5Mpa or less.
Remark*2 – Min. start time should be 0.003 seconds
Remark*3 – Range of applicable viscosity can be changed by liquid type

Click here to request information about this product